How to take a home blood test

• Visit https://app.welzo.com/register/ to activate your kit.
• Use the registration number provided on the PDF included in your kit during the registration process.
• Follow the instructions to complete the activation.

Remove the cap from your tube/tubes. Make sure the tube is standing upright in a position that you can access.

Wash your hands thoroughly with warm water for 2 - 3 minutes. This is not only to clean your hands but to help increase blood flow. You can also do jumping jacks/swing your arms around to get more blood to your fingertips.

Pro tip: Take a long warm shower before collecting your sample and drink lots of water to help your blood flow.

1. Clean your finger using the alcohol wipe, twist off the lancet cap and press the lancet into the outer centre of your fingertip.

2. Wipe away the first drop of blood firmly.

3. Starting at the top of your palm, massage down your hands towards the fingertip.

4. Tap the blood droplets into the tube.

5. Fill the tube to the required line. Yellow tube = 600 line. Purple tube = 250 line.

6. Once completed clean your finger with a wipe and apply a plaster.

Once you have enough blood in your tubes, place the correct coloured cap onto the tube.

For purple tubes: Swirl the tube slowly for 20 seconds.

For yellow tubes: Rotate/flip the tube ten times, your blood will become thicker as you do so.

Important: Fill out the label and wrap it around the tube.

1. Put the tubes (with the labels) inside the protective plastic case.

2. Important: Fill out the return form and register your kit online here.

3. Put the box, with the sample and return form into the prepaid envelope and seal.

4. Post your sample in a priority postbox for next-day delivery on working days to our lab for analysis.

5. We recommend you take a photo of your return label in case it gets lost in the mail for tracking purposes.

Download the Welzo app to view your test results:

Apple Device

Android/Google Device